Lighting Control
Lighting control ranges from simple phase dimming to building-wide systems that manage scenes, schedules, daylight and occupancy.
Product capability vs. system integration. Each LICHTNOVE® product page states the dimming and driver options published for that luminaire (for example Triac, 0–10 V or DALI drivers). Connection to a building or home control system (DALI, KNX or Zigbee) is achieved through compatible drivers, interfaces or gateways selected for the project. Unless a product page specifically states native support, protocol integration should be read as “available with compatible driver/control options” and confirmed during specification.
Common dimming methods
| Method | How it works | Typical use |
|---|---|---|
| Triac / phase-cut | Dims by cutting the mains waveform; uses existing two-wire circuits. | Residential retrofit, simple scenes |
| 0–10 V | Separate analogue control pair sets the driver output. | Commercial, linear systems |
| DALI | Digital, addressable two-wire bus; each driver can be controlled and queried individually. | Hospitality, offices, scene control |
System integration
DALI, KNX and Zigbee are covered on their own pages. Plan control early: driver type, wiring, gateways and scene requirements affect both product selection and electrical design.